MagSense

Traffic solutions for the cities of tomorrow

Vehicle detection

Mobilisis offers high-quality applications based on the MagSense magnetic field sensor system. Its use is very efficient and helps maximizing profit. Thanks to new patented detection loop consisting of magnetic field sensors connected to high-speed network, Mobilisis opens new possibilities in detection and counting vehicles with MagSense products, nonetheless they are parked or are moving. MagSense is a system that offers high returns on investment (ROI), fast time-to-market, and low total costs of ownership (TCO).

New dimension in vehicle detection and counting

If you need a reliable information from any parking lot at any time, weather or surface condition, or if you need a system to transmit up-to-date information about occupancy of any parking lots to an online system, MagSense is a solution for you.

It reliably detects wherever a vehicle occupies a parking space or when the parking space becomes available again. It may be used to provide real time parking information about occupancy state (in the city or other outdoor parking areas). MagSense transfers precise real time parking data using a robust construction and 24/7 internet connection. The data can be used to navigate drivers directly to the closest unoccupied parking space thus minimizing parking – searching traffic and increases traffic flow.

The small sensors can be easily embedded in the asphalt of each parking bay. Alternatively they can be installed in an empty conduit under the parking bay. They will be adopted in a sensor network, protected by patent law, minimizing the costs by reducing civil works. The decision logic ensures an accuracy of the detection rate of more than 99%.

TRAFFIC COUNTING

  • Enables the traffic counting as well as the occupancy detection of single parking space
  • Unlimited number of parking lots monitored
  • Preassembled or on-site assembly of sensors
  • Low operating power consumption
  • Equipment is robust and easy to integrate into existing IT infrastructure like Parking Guidance Systems
  • Minimum and low-cost maintenance

Osobna i kombi vozila

Easy

Easy+

Advanced

Mobileye advanced

Mobilni terminal WiTa

Teretna vozila

Easy Fuel

Advanced Fuel

Exstreme Logistic

Mobileye advanced

Mobilni terminal WiTa

Strojevi

Advanced Fuel

Professional

Mobilni terminal WiTa

Specialni proizvodi

Mobilni terminal WiTa

Mobileye easy

Mobileye advanced

Trailer easy

Trailer Cold

Mobilisis Custom

SENSOR BUS

  • Detection loop consisting of magnetic field sensors and robust cable connected using high-speed data BUS
  • May be used as vehicle counting loop detector or single parking space occupancy detector or even barrier detector loop
  • User defined length, count and space between sensors
  • Compact sensor size enables lying detection loop into asphalt by micro-trenching method
  • Wired connection enables no latency in communication and small power consumption
  • Due to complete eliminate of batteries maintenance – free operation
  • Best performance in counting vehicle by installing equipment on the ceiling of level below or even under a road bridge
  • Unaffected by ceiling material. Detection through concrete or steel if installed up to 500 mm below the driving surface
  • Enables installation without traffic detouring

MAGSENSE CABLE

MagSense Cable1x2xAWG24 + 1x2xAWG22 (SHIELDED)
Cable diameter9,2 mm
Outer jacket Special BlendPolyvinylchlorid Basis (PVC)
Outer jacket colorblue (similar to RAL 5015)
Operating temperature range-25 °C to +80 °C
Total weight0,107 kg/m
Flame retardantUL 1685 (CSA FT 4)
Oil resistance According1581 Sec. 480 (60°)

MAGSENSE SENSOR

Dimensions (L x H x W)110 mm x 13,5 mm x 9 mm
Operating temperature-10 to +65 °C
ProtectionIP67
Colorgray or black
Weight20 g
Operating voltage6 – 16 V DC
Current consumption10 mA @ 16 V
CommunicationCAN bus, 125 kbps
Max sensors per line100 @ 16 V
Max cable length200 @ 16 V

3DTC CONTROLLER

  • Universal controller is used for traffic counting or for single space detection
  • Various combinations and number of vehicle counting and detection loops are supported
  • Operation and configuration can be performed via the keypad in conjunction with a 2-line LCD display, or with a setup program for greater convenience
  • Data can be stored on local flash memory or transmitted to host via GSM data link
  • Detection and counting events monitoring over 2-line LCD display
  • Easy connection to dynamic traffic display. LDxx series supported
  • Universal interface for 3rd party systems providers
  • Firm update over OTA (over the air) supported

MagSense 3DTC controller enables various detection and counting methods. MagSense 3DTC Controller is used for moving or stationary vehicle detection and counting. A significant reduction of the installation work is achieved due to use of integrated GPRS modem and embedded SIM card. Operation and configuration can be performed via the keypad in conjunction with a two-line LCD display or with a setup program for greater convenience.

That way, parameters such as number of detection loops, sensitivity and operation mode can be set. A connection to higher-ranking systems or the other Parking Guidance Systems (e.g. the system visualization software or traffic signs or third party systems) is possible via the digital interface RS485, RS232, CAN or digital outputs. The 3DTC comes in rail – mounting case, intended for installation on a DIN rail 35 mm × 7.5 mm according to DIN EN 60715.

Voltage supply8-35 V
Average power4 W
Current consumption330 mA @ 12 V
ProtectionFuse 3A
Electrical connectionScrew terminals up to 2.5 mm2
Inputs/Outputs6 x Input /4 x Output (software configurable)
Analog / Digital / Impuls
Dimensions (WxHxD)22,5 mm x 115,0 mm x 117,8 mm
GPRS (optional)Class 10, PDU, SMS, Quadband, SIM port / Embedded SIM
External antenna
GPS (optional)u-blox 7, External (MMCX) or internal antenna
CAN BUS2x CAN BUS (CAN-H,CAN-L,POW, GND)
RS485 BUS485-A, 485-B, Power, GND
CasePolyamide, UL 94 V-2, DIN-rail 35 mm × 7.5 mm according to EN 60715, IP20
Operating temperature-10°C do +65°C
Storage temperature-20°C do +65°C
Interference emissionClass A (EN 55022)
Electromagnetic compatibility (EMC)DIN EN 61326-1

Osobna i kombi vozila

Easy

Easy+

Advanced

Mobileye advanced

Mobilni terminal WiTa

Teretna vozila

Easy Fuel

Advanced Fuel

Exstreme Logistic

Mobileye advanced

Mobilni terminal WiTa

Strojevi

Advanced Fuel

Professional

Mobilni terminal WiTa

Specialni proizvodi

Mobilni terminal WiTa

Mobileye easy

Mobileye advanced

Trailer easy

Trailer Cold

Mobilisis Custom